Recording Vocals In Fl Studio 12
14 Tips for Recording and Mixing Vocals - The Right Way. Updated: Jan 12, 2018. Mixing & Mastering There's a lot you can get away with in your music, but the one thing your listeners will never forgive is crappy vocals. Here are the reasons: It was built with the home recording beginner studio in mind. It’s got anything you need to record properly. The microphone has top-notch quality audio. Free popshield. Free shockmount. Free XLR Cable. 10 Year Warranty. Rode NT1A – Studio Secrets. When I try to record vocals into the playlist with a microphone in FL Studio 12 I will speak into the microphone and hear my voice one second later in my headphones when I listen to the song after I finish recording - my vocals will be off beat buy at least one second and when I record I can only hear sound in one headphone.
If your characterization of 'white noise' is somewhat accurate, you are out of luck. You can get various bits of noise from unstable power supply and inverters for step-up DC/DC converters and ground loops. But those will be whining or humming. Broadband noise, in contrast, is almost sure to originate from the analog circuitry of your microphone, and it cannot be 'weak power' either since USB runs on fixed voltage.Now USB mics are usually electret-condenser capsules.
Recording Vocals In Fl Studio 12
Those cannot offer the same S/N ratio as true condenser microphones, particularly not large-diaphragm condensers. The fact this happens in various different software packages shows you it isn't caused by them, so no, don't bother buying a new DAW package. I'd lay odds on it being because you have a USB mic plugged directly into a laptop - this is rarely a good idea if you want even semi-decent sound quality. So get yourself an audio interface.If you do want to diagnose exactly where the problem is without buying an interface, the standard way to do this is swap each part for a known good one:. Find a friend with a mic and try it on your system (and your mic on theirs) to see if it is a faulty mic.
Then see if you can borrow an audio interface and try running your mic through that. Continue on through your sound chain until you identify the component that is introducing the sound. The white noise in the background is most likely due to one or more issues.
Start by checking the Microphones levels within system settings. If the Mic you are using also has a gain adjustment knob, make sure you lower the gain on the microphone as well. Check within your DAWS preferences and make sure the Mic input is also not adjusted too high.
As for USB microphones; If you are using a USB condenser Mic, it has a Phantom Power supply built in. Disregard anyone who tells you different as they are misinformed. The Blue YETI, Audio Technica AT2020 USB condenser Mics produce an excellent and accurate sound with very low self-noise and are absolutely suitable for home recording. This information is relevant as you may have a defective device if everything else checks out.
Also make sure you place the Mic away from any magnetic fields especially Modems/Routers. I usually keep my microphone 6 ft. From any other electronics. Hope this helps.